Hi friend 
Hope this email find you well :)
When we fix the sensor flex cable ,it's easy to make the head part of iphone brocken or make the Face ID faulty.
How can we avoid ?
Today want to share you some tips after tear down  :
1.Carefully slide the flat edge of your spudger underneath the flex cable below the microphone.

Twist gently to separate the microphone, while being careful not to strain or damage the flex cable.

If needed, use the point of the spudger to finish separating the microphone from its notch in the front panel.

2.Working left to right, slide an opening pick beneath the flex cable and underneath the proximity sensor + flood illuminator module.

It's helpful to lift and hold the speaker out of the way for access. Just be careful not to pull on the thin flex cable while you work.


3.Use tweezers to wiggle the ambient light sensor and lift it from its notch in the display.
（he sensor remains attached to the rest of the sensor assembly via a very thin flex cable. Be careful not to strain or damage the cable.）

4.Remove the earpiece speaker and front sensor assembly.

4.Remove the earpiece speaker and front sensor assembly.
Our flex cable , each is selected and  confirmed  the quality,teared down :)

Iphone X ----3.68$
IphoneXR----3.96$
Iphone Xsmax----4.8$
Welcome to contact Becca for more details,my WHATSAPP :+8615797875928
Best Regards!

Have a lovely day!


Becca
Area Manager 

Facebook:https://www.facebook.com/beccabizbee
Whatsapp:https://api.whatsapp.com/send?phone=008615797875928
Ins:https://www.instagram.com/beccawangbizbee