QIANLI copy power battery data corrector can solve the problem of iPhone11-12 Pro Max battery encryption, and the efficiency and cycle cannot be corrected problem after replacing the battery cells. In order to correct the battery's "health" and "cycles" with the copy power, it is necessary to carry the potential tag-on or built-in flex cable while retaining the original flex cable.
Video Overview
1. The Front Steps: Change the new battery cell, skip it if it has been done(Battery should be disassembled)
First the old battery must be an original one, then a spot welder, a new battery cell, the copy power battery data corrector, the flex cable are needed.
Step 1: Get the new battery ready, cut the original battery protection board off, and be cautious do not cut the anode and cathode at the same time;
Step 2: Cut the flex cable of the original battery;
Step 3: Spot welding the new battery cell to the original battery protection board, and make sure it is well protected.
2. Connect the tag-on or built-in flex after cell replacement
Plan A:Tag-on Flex Solution
- Fast and convenient, no requirement for any skills
- Advantage: Connect to inline connector directly, easy to use
- Disadvantage: Visible mark on the surface
Plan B:Built-in Flex Cable Solution
- Requirement of operation skills, leave no mark on the surface
- Advantage: More professional for repairing without evidence
- Disadvantage: Operation requires jumping wires
Step 1: Buckle the flex to the battery as in the image;
Step 2: Connect Copy Power to “Qianli Repair Helper” on the PC end, Click “Read Data”;
Step 3: Correct specific parameters in the battery interface;
Step 4: Click "Write or Bonding"button and wait for the writing to be completed;
Step 5: Take the modified battery off and stand-by, then use the non-native battery to reboot the phone;
Step 6: Fold the flex as example, assemble the battery and turn the phone on, no pop-ups, repair status is gone, battery health is corrected to be 100%, Cycle shows 0.
Note:
- Software Download: www.qianlispace.com
- To remove the battery data, connect the device to 'Qianli Repair Helper' on the PC.
Before the data is corrected, do not connect to i4 or Shalou in order to avoid data is recorded, thus it would not be green.
If you are interested, Only please contact me directly to get a very good price and more infos :)
--Contact me now to get VIP price😊
Order online directly is available,please register an account under my name "Amy" and you will receive a discount of 100 USD.
https://bizbee.com/100165UC.html
Whatapp Wechat
BIZBEE LIMITED
Amy_Sale manager
Web: https://www.bizbee.com/
https://www.bizbee.com/100165UC.html
Email: amy.fang@bizbee.com
Whatsapp/Wechat/Skype/Phone: +86 18720959482
Add: Xinghe World, Wuhe Blvd South, Longgang District, Shenzhen, China