Tips For iPhone 11 Series Non-Genuine Important Display Message Fix
  Dear Manager, 
 
  If you replace the screen of iPhone 11 or above, whether it is a genuine screen or a third-party repair display, you will see the “Important Display 
  Message” on the iPhone (As shown in the figure below). It mentions unable to verify this iPhone has a genuine Apple display. Now here’s a solution
  to fix it, read more, and you will find what you want.
   
  Today let to show you how to fit step by step for the iPhone 11, iPhone 11 Pro, iPhone 11 Pro Max.
 
Register an Account
Operation Method
Step 1: Remove touch module Tear down the touch module from the original display, use hot air gun to blow and steel tool to pry carefully.
   Step 2: Clean out the touch module Clean out the black adhesive from the module with solder flux and solder wick and heat up with hot air gun.
  Step 3: Connect the touch module to the touch module connector (please refer to the video for detail operation)
 
  For iPhone 11:
 1) Find the touch module connector on the mobile phone main board as the picture shows below. Remove the resistor R8156 which is next to the touch     module connector.
 2) Use conductivity copper conductor to connect F11-14 pin (12C3 bus data signal), to the data signal point of the resistor R8156.
 3) Find the position of the inductor L8100 (1.8V power supply) next to the touch module connector as the picture shows, and connect E16 to L8100.
 4) Find the position of the capacitive clock signal and connect it to F13-12 Pin.
 5) Find the ground-to-ground pin on the touch module, and connect it to the ground-to-ground position of the main board.
 
 For iPhone 11 Pro and iPhone 11 Pro Max:
 1) Find the touch module connector on the mobile phone main board as the picture shows below. Remove the resistor R8120 which is next to the touch    module connector. 
 2) Use conductivity copper conductor to connect F11-8 pin (12C3 bus data signal), to the data signal point of the resistor R8120.  
 3) Find the position of the capacitor C8190 (1.8V power supply) which is next to the touch module connector as the picture shows, and connect it to   E160.
 4) Find the position of the capacitor C8121 (clock signal) which is next to the touch module connector, and connect it to F13-7 Pin.
 Find the ground-to-ground pin on the touch module, and connect it to the ground-to-ground position of the main board.
 
More Video Please Check Below 
      For online order and more parts, Please register an account and order directly 
  The big discount as high as 100USD please register an account an account with "Amber"   https://www.bizbee.com/100157TP.html 
Bizbee Online Shop
                              Also welcome to contact me directly by mobile/Whatsapp/ Wechat/:0086 131 4994 5359,24 hours online !  
BIZBEE LIMITED
Web:  https://www.bizbee.com/100157TP.html
Tel: +(86) 755 2376 3769
Amber_Sale manager
Email: Amber.wang@bizbee.com  
Whatsapp/Wechat/Skype/Phone: +86 13149945359
Facebook:https://www.facebook.com/profile.php?id=100065415535910
Add: Xinghe World, Wuhe Blvd South, Longgang District, Shenzhen, China